Connexion Créer un Compte


Panier : 0 Produit
Total :
Panier vide!
Produit Afficher
Nombre de vues : 2241
Date de publication : 27-03-2018

Nitrogen Evaporators SC-200

Poids: 6.1 kg



Pays étranger
China (中國 • 中国)
Livraison à l'étranger
Aucun délai
Virement Bancaire , Western Union
Vente Seulement en Gros , Sur Commande

Nitrogen Evaporators SC-200

The Nitrogen evaporator SC-200 is mainly used for concentrating or preparing sample in batch. Such as drug screening, hormone analysis, liquid phase and mass spectrometry in the analysis of sample preparation. It works by blowing nitrogen in the surface of sample which is being heating to accelerate evaporating and separating the solvent in the samples without oxygen. Instead of the rotary evaporation instrument, nitrogen evaporator can efficiently concentrate dozens of sample simultaneously.

  • The position of gas needle in air chamber plate can be adjusted to suit for different types of tubes
  • The height of the air chamber plate can be adjusted. The length of a standard gas needle is 150mm
  • Gas needle is controlled independently. Separately blow of each needle and flow regualting of each needle are available to avoid gas waste
  • The entire equipment can be put into ventilation cabinet when the concentration sample in toxic solvents
  • Built in overheat protection, automatic fault detection and fault beep alarm devices
  • LED display immediate temperature and diminishing time. Operation is simple and convenietn. Uncertain time can be set for continuous operation
  • Synchronously working with heating by dry bath in the bottom and nitrogen blowing on the surface accelerates liquid evaporation and sample concentration
  • Standard configured air cavity and adjustable bracket
Temp. control range RT+5℃~150℃ RT+5℃~150℃
Temp.Setting.Range 5℃~150℃ 5℃~150℃
Temp.Stability @ 40~100℃ ≤±0.5℃ ≤±0.5℃
Temp.Stability @ 100~150℃ ≤±1℃ ≤±1℃
Block Temp. uniformity@ 100℃ ≤±0.5℃ ≤±0.5℃
Block Temp. uniformity@ 150℃ ≤±1℃ ≤±1℃
Temp. Display Accuracy 0.1℃ 0.1℃
Heating Speed ≤30min (40℃to150℃) ≤30min (40℃to150℃)
Time Range 1min-99h59min or continuous 1min-99h59min or continuous
Needle Plate Max.Lift Stroke 285mm 285mm
Gas-in Joint Outer Diameter Φ7mm Φ7mm
Nitrogen Pressure ≤0.1MPa ≤0.1MPa
Nitrogen Flow Rate 0~10L/min 0~10L/min
Needle Length 150mm 150mm
Sample Capacity 1 standard block 2 standard block
Voltage AC 220V/AC 110V, 50Hz/60Hz AC 220V/AC 110V, 50Hz/60Hz
Power 200W 400W
Fuse 250V, 2A/3A,Φ5×20 250V, 3A/6A,Φ5×20
Dimension (W×D×H) 200×230×525mm 200×260×525mm
Net Weight 5.1kg 6.1kg



Liste des commentaires:
Aucun commentaire n'a été posté

Donnez votre avis sur cet article:


Autres Produits